Skip to main content

Favero Assioma Upgraded Pedal Body

Josh Matthew June 10, 2020


Improved aesthetics and a wider release torque tension!

Clear selection


Favero Assioma Upgraded Pedal Body

If you bought your Favero Assioma pedals pre-July 2019, chances are you have the older generation pedal body. Favero has since released a new pedal body for the Assioma UNO and DUO. The Favero Assioma Upgraded Pedal Body features improved aesthetics and perhaps most importantly, an upgraded black spring.

The new spring has a wider release torque tension. Specifically, the spring’s release torque tension range is from 8Nm to 20Nm (vs. 11Nm to 20Nm in the old pedal bodies). This wider range allows for lower release tension which makes the pedals easier to clip in and out of.

We highly recommend this new pedal body as it will make your current Assioma’s even better and easier to use!


Instructions for Changing Your Pedal Body

Changing the pedal body is not complicated. Simply remove the endcap and the M6 nut under the endcap in order to release the pedal body from the spindle. Next, transfer all bearings from the old pedal body into the new. Lastly, reinstall the new pedal body. Make note not to over-tighten the endcap in order to avoid possible damage to the internal threads. The suggested force to apply is 2-3 Nm. Please see the Assioma Technical Data Sheet where you can see the pedal’s composition and the necessary tightening forces in detail.


There are no reviews yet.

Be the first to review “Favero Assioma Upgraded Pedal Body”

Shopping Cart