Skip to main content

power2max NGeco Cane Creek MTB Power Meter

Niel Ubod October 11, 2023

$590.00$640.00

Accurate and affordable power2max NGeco power for your Cane Creek MTB crankset!

PLEASE NOTE, WE HAVE THE SIGEYI CANE CREEK MTB POWER METER IN STOCK!

Out of stock. Please select variation below to sign up for notifications!
Clear selection

power2max NGeco Cane Creek MTB Power Meter

The NGeco is the newest model in the power2max line-up. With features such as dual leg power measurement, ANT+/Bluetooth SMART compatibility and left/right power balance, the power2max NGeco Cane Creek MTB Power Meter comes fully-loaded. In addition, the NGeco is accurate to +/- 2.0% in all environmental conditions and is easy to use with features such as auto-zero and accelerometer-based cadence measurement. In fact, there is no other power meter that provides dual-leg power measurement plus these other features at only $590!

 

Key Product Details

Compatibility:

This power2max fits Cane Creek direct mount 3-bolt cranksets. Regarding chainrings, it requires a 104 BCD 4-bolt MTB chainring (which is different than the direct mount chainrings found on many MTB cranksets). If you don’t already have a 104 BCD 4-bolt chainring, we offer several to choose from. See Compatibility tab for more information.

Power Measurement:

The power2max power meter measures power at the spider and is therefore able to measure power from both legs.

Key Features:

Dual-leg power measurement, accurate to +/- 2.0%, 300-400 hours of battery life, CR2450 user-replaceable battery, left/right power balance with system upgrade, ANT+ and Bluetooth compatibility, auto-zero (automatic calibration). See Specs tab for more information.

Advice From Our Staff:

power2max makes wonderful power meters. We use them on a number of our own bikes here. They measure power from both legs, are super reliable, accurate and are reasonably priced. Highly recommended.

 

Options For This Power Meter

Chainline and BCD: This power meter is available in the following versions:

  • 1X Boost | 104 BCD
  • 1X Standard | 104 BCD

The 1X Boost configuration is recommended if your bike currently has a direct mount chainring with a 3 mm offset (which is what most bikes have). These bikes usually feature 52 mm chainlines and 148 mm rear hubs. Please note this Boost version can also fit Super Boost bikes where you are replacing a 3 mm direct mount chainring.

The 1X Standard configuration is used for bikes that have a direct mount chainring with a 6 mm offset (usually found on older bikes). These bikes usually feature 49 mm chainlines and 142 mm rear hubs.

Compatibility

Crankset: The power2max NGeco Cane Creek MTB Power Meter fits Cane Creek direct mount 3-bolt cranksets. In order for this power meter to fit, you must ensure your crankset uses this interface. Please see the image below.

Cane Creek MTB 3-Bolt Interface

Chainrings: This power meter requires a 104 BCD 4-bolt MTB chainring (which is different than the direct mount chainrings found on many MTB cranksets). If you don't already have a 4-bolt chainring, we offer several to choose from.

The smallest chainring you can use on a power2max MTB power meter is a 30T round or 32T oval.

If you purchase a new chainring with your power meter, we will bolt it on to your power meter before shipping, which will make installation that much easier when you get it.

power2max NGeco Cane Creek MTB Specs

NameNGeco Cane Creek MTB Power Meter
Bike TypeMTB
Location of Power MeasurementSpider
Left or Both Legs MeasuredBoth
Independent Left/Right MeasurementYes - Power Balance (available via upgrade)*
InstallationMore involved (60 min. estimated)
Chainring Configuration1X or 2X
Speeds11- or 12-speed
Chainline SpacingStandard, Boost or Super Boost
Communication ProtocolANT+ and Bluetooth SMART
Claimed Accuracy+/- 2.0%
Active Temperature CompensationNo (however features Auto Zero)
Weight125 grams
Battery TypeCR2450
Battery Life300-400 hours
Method of Cadence MeasurementAccelerometer
BCD104
Warranty2 years

*Power Balance Upgrade

The power2max NGeco measures power from both legs right out of the box. However, with power balance, you can see how much power each leg is generating individually. If this information is important to you, you can choose to upgrade the power meter at any time. (Please note, you can also purchase the NG version of the power2max which comes with this feature unlocked, along with a rechargeable battery and a longer 5-year warranty.)

You can upgrade your NGeco using the power2max app once you receive the power meter. The cost to upgrade is 50 euros.

In the Box

  • power2max power meter
  • CR2450 battery
  • User's manual

Tools Needed for Installation

You will need the following tools for installation of this product. You can purchase many of these commonly used tools in our store.

  • T25 Torx bit
  • 8 mm Allen key

Common Questions and Answers

Question: Do you have any new chainrings for this Cane Creek power meter?

Reviews

There are no reviews yet.

Be the first to review “power2max NGeco Cane Creek MTB Power Meter”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

OTHER CUSTOMERS ALSO VIEWED

THIS PRODUCT IS FREQUENTLY BOUGHT WITH

Shopping Cart