power2max NGeco Shimano MTB Power Meter

Dual-Leg Power Measurement

The NGeco power meter measures power at the crank spider. This means it measures both left and right leg power.

Accurate to +/- 2.0%

The power2max is always consistent and accurate, regardless of the environmental conditions.

Long Battery Life

The power meter gets 300-400 hours of run time off of a single CR2450, user-replaceable battery.

Left/Right Power Balance

In addition to measuring both legs, the NGeco can also provide left/right power balance with a system upgrade.

ANT+ & BLE

Featuring both ANT+ and Bluetooth SMART, the power meter can be used with virtually any bike computer or smart phone.

Auto-Zero

With the auto-zero feature, you never have to worry about manually calibrating the unit. Just get on and go!

Options

Chainline and BCD: This power meter is available in the following chainline and BCD options:

• 1X Standard | 104 BCD
• 1X Boost | 104 BCD
• 2X Standard | 104/64 BCD

Tip – If you have a 148 mm rear hub, your bike has boost spacing. If you have a 142 mm rear hub, your bike has standard spacing.

Lock Ring Tool: The Lock Ring Tool for Shimano is required for installation. We recommend you order it unless you already own one.

Compatibility

Crankset: The power2max NGeco Shimano MTB Power Meter is compatible with Shimano MTB direct mount cranksets using a 1x chainring such as the M9100, MT9000, M8100, M7100 and M6100.

Chainrings: This power meter requires a 104 BCD 4-bolt chainring MTB chainring. If you don’t already have one, we offer several different Shimano 12-speed MTB chainrings for power2max. If you purchase a new chainring with your power meter, we will bolt it on to your power meter before shipping, which will make installation that much easier when you get it.

In the Box

• power2max power meter
• CR2450 battery
• User’s manual

power2max NGeco Shimano MTB Specs