power2max NG SRAM Road Power Meter

Dual-Leg Power Measurement

The NG power meter measures power at the crank spider. This means it measures both left and right leg power.

Accurate to +/- 1.0%

The power2max NG power meter is accurate to +/- 1.0% in all environmental conditions.

Rechargeable Battery

The power meter uses a rechargeable battery and gets 150 hours of run time off of a single charge.

Left/Right Power Balance

In addition to measuring both legs, the NG also provides left/right power balance.

ANT+ & BLE

Featuring both ANT+ and Bluetooth SMART, the power meter can be used with virtually any bike computer or smart phone.

5-Year Warranty

The NG comes with a full 5-year manufacturer’s warranty, the longest of any power meter on the market!

Options

BCD: This power meter is available in either a 110, 130 or 110 4-Bolt Shimano BCD in order to fit your choice of chainring sizes.

Compatibility

Crankset: The power2max NG SRAM Road Power Meter is compatible with SRAM S-900, Force 1, Force 22, Rival 1, Rival 22 and CX1 cranks with a 3-bolt interface. Installation requires that you simply remove your existing crank spider and install NGeco in its place. Please contact us with any questions.

Chainrings: This power meter requires a 4- or 5-bolt 110 or 130 BCD chainring (depending on the version you select). In most cases, you can use your existing chainrings assuming they have this same configuration. Please note, some SRAM cranksets come equipped with direct mount chainrings. In this case, you will need to purchase a new 4- or 5-bolt chainring as direct mount chainrings won’t fit a power meter spider (we have several chainrings to choose from on our Chainrings page).

Please also note – This power meter is not compatible with SRAM Red cranksets or SRAM 1X 40T chainrings (however we do sell Praxis 1X 40T chainrings that will work).

In the Box

• power2max power meter
• Charging cable
• User’s manual

power2max NG SRAM Road Specs