Skip to main content

power2max NG SRAM MTB Power Meter

Josh Matthew April 12, 2024

$940.00$990.00

power2max’s premier NG power for your SRAM MTB crankset!

Clear selection

power2max NG SRAM MTB Power Meter

The NG is the premier model in the power2max line-up. With features such as dual leg power measurement, ANT+/Bluetooth SMART compatibility and left/right power balance, the power2max NG SRAM MTB Power Meter comes fully-loaded. In addition, the NG is accurate to +/- 1.0% and is easy to use with features such as auto-zero and accelerometer-based cadence measurement. The power2max NG model also features a rechargeable battery with 150 hours of run time as well as a full 5-year warranty!

 

NG vs. NGeco

You are viewing the power2max NG. This is power2max’s premium version. It features several upgrades over the NGeco:

  • Better accuracy (+/- 1.0% vs. +/- 2.0%)
  • Rechargeable battery (vs. coin cell battery)
  • Longer 5-year warranty (vs. 2 year warranty)
  • Additional training metrics including left/right power balance

 

Key Product Details

Compatibility:

This power2max fits SRAM direct mount 3-bolt cranksets. Regarding chainrings, it requires a 104 BCD 4-bolt MTB chainring (which is different than the direct mount chainrings found on many SRAM MTB cranksets). If you don’t already have a 104 BCD 4-bolt chainring, we offer several to choose from. See Compatibility tab for more information.

Power Measurement:

The power2max power meter measures power at the spider and is therefore able to measure power from both legs. This NG version is also able to measure your left vs. right leg power balance.

Key Features:

Dual-leg power measurement, accurate to +/- 1.0%, 150 hours of battery life, rechargeable battery, left/right power balance, ANT+ and Bluetooth compatibility, auto-zero (automatic calibration), 5-year warranty. See Specs tab for more information.

Advice From Our Staff:

This is probably our best-selling MTB power meter. SRAM 3-bolt MTB cranksets are very common and this is a great way to add power to them. It measures power from both legs, is accurate and reliable. We believe the price also represents a good value for what you get (even for this more expensive NG version). We highly recommend power2max power meters and use them on many of our own bikes.

 

Options For This Power Meter

Chainline and BCD: This power meter is available in the following versions:

  • 1X Boost | 104 BCD
  • 1X Standard | 104 BCD

The 1X Boost configuration is recommended if your bike currently has a direct mount chainring with a 3 mm offset (which is what most bikes have). These bikes usually feature 52 mm chainlines and 148 mm rear hubs. Please note this Boost version can also fit Super Boost bikes where you are replacing a 3 mm direct mount chainring.

The 1X Standard configuration is used for bikes that have a direct mount chainring with a 6 mm offset (usually found on older bikes). These bikes usually feature 49 mm chainlines and 142 mm rear hubs.

 

Other Versions to Consider

NGeco Version: While the NG version you are viewing here features slightly better accuracy, a rechargeable battery, a longer warranty and some additional training metrics, we also sell the more affordable power2max NGeco SRAM MTB Power Meter version.

Compatibility

Crankset: The power2max NG SRAM MTB Power Meter fits SRAM direct mount 3-bolt cranksets. In order for this power meter to fit, you must ensure your SRAM uses this interface. Please see the image below.

SRAM 3-bolt Interface on MTB crankset

Chainrings: This power meter requires a 104 BCD 4-bolt MTB chainring (which is different than the direct mount chainrings found on many SRAM MTB cranksets). If you don't already have a 4-bolt chainring, we offer several to choose from.

The smallest chainring you can use on a power2max MTB power meter is a 30T round or 32T oval.

If you purchase a new chainring with your power meter, we will bolt it on to your power meter before shipping, which will make installation that much easier when you get it.

power2max NG SRAM MTB Specs

NameNG SRAM MTB Power Meter
Bike TypeMTB
Location of Power MeasurementSpider
Left or Both Legs MeasuredBoth
Independent Left/Right MeasurementYes - Power Balance
InstallationMore involved (60 min. estimated)
Chainring Configuration1X or 2X
Speeds11- or 12-speed
Chainline SpacingStandard, Boost or Super Boost
Communication ProtocolANT+ and Bluetooth SMART
Claimed Accuracy+/- 1.0%
Active Temperature CompensationNo (however features Auto Zero)
Weight120 grams
Battery TypeRechargeable
Battery Life150 hours
Method of Cadence MeasurementAccelerometer
BCD104
Warranty5 years

In the Box

  • power2max power meter
  • Charging cable
  • User's manual

Tools Needed for Installation

You will need the following tools for installation of this product. You can purchase many of these commonly used tools in our store.

  • T25 Torx bit
  • 8 mm Allen key

Common Questions and Answers

Question: I have a SRAM MTB crankset. Will the power2max SRAM Power Meter fit?

Reviews

There are no reviews yet.

Be the first to review “power2max NG SRAM MTB Power Meter”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

OTHER CUSTOMERS ALSO VIEWED

THIS PRODUCT IS FREQUENTLY BOUGHT WITH

Shopping Cart