CeramicSpeed BSA Bottom Bracket for SRAM GXP Road
The CeramicSpeed BSA Bottom Bracket for SRAM GXP Road fits English threading on road bikes. These bikes have a 68 mm wide, 34 mm inside diameter shell with reverse threading on the drive side. This CeramicSpeed BSA Bottom Bracket fits cranksets with a 24/22 mm tapered axle such as SRAM and Quarq.
The CeramicSpeed Difference
CeramicSpeed Standard Bearings last at least three times longer than other bearings. That’s thanks to hardened-steel races and CeramicSpeed Balls that are 100% smoother and 15% harder than other ceramic bottom brackets. CeramicSpeed bearings have a frictional drag of 0.3-0.4 watts per set, which represents an average 75% drag reduction compared to other BBs.
Coated Finish Option
The unique coating formula is a metallic layer that covers the bearing races and makes them 75% harder than steel. Thanks to this, they are highly resistant to corrosion and the coating provides an even lower friction than the standard bearings. Even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible with the coated version. CeramicSpeed coated products are covered by a lifetime warranty.
In the Box
- 2 threaded cups with bearings installed
- 2 dust covers
- 1 mm spacer
- 0.5 mm spacer
- GXP wave washer
- Spacer tube
- All Round Grease
- Sticker sheet