Accurate
Certified accurate to +/- 0.5% – perhaps the best accuracy of any power meter.
$750.00 – $995.00
+/- 0.5% accuracy, L/R power, durable, 500 hr. battery life, CPS technology & more!
The Verve InfoCrank M30 Power Meter is without question one of the most accurate power meters you can buy. The InfoCrank achieves its accuracy and consistency by placing its strain gauges within the crank arm – the only power meter manufacturer to do this. This unique location places the strain gauges directly in the path of torque so that the tangential force which pushes the bike forwards – not the twisting of the cranks, registers the output. This makes it accurate to within +/- 0.5% all the way up to 3,000 watts – perhaps the best accuracy of any power meter. In addition, the InfoCrank locates a power meter on each crank arm, which gives it the ability to measure left and right power independently. It is also the only power meter to use CPS technology to measures cadence. This means no magnet and precise cadence measurement.
Accurate
Certified accurate to +/- 0.5% – perhaps the best accuracy of any power meter.
Left/Right Power
Can measure total as well as true left and right power.
No Need to Calibrate
There is no need to perform a zero-offset before every ride.
CPS Technology
CPS Technology ensures precise cadence detection without the use of magnets.
Long Battery Life
500-hour battery life compared to approximately 300-350 hours for other power meters.
Super Durable
The electronics are protected inside a high-grade alloy crankset.
Crank Arm Lengths: 170 mm | 172.5 mm | 175 mm
Chainrings: Praxis 53/39 | Verve Aero 53/39 | No chainrings (if you already have them)
Praxis Works Bottom Brackets: BB30 | Press Fit 30 (PF30) | BB86 Press Fit | OSBB (Specialized) | BSA (English Threaded)
NOTE – On the Checkout page, please leave us a note with what bottom bracket you would like.
The Verve InfoCrank M30 130 BCD power meter comes with a Praxis M30 30 mm spindle for its integrated bottom bracket design. The spindle is purpose built for the M30 bottom bracket exclusively. The power meter includes specific bottom bracket cups from Praxis so the power meter will fit 68 mm wide BB30, Press Fit 30 (PF30), BB86 Press Fit, OSBB (Specialized), BSA (English Threaded), BBRight (Cervelo) and EVO386 frames.
Your bike frame needs to have one of theses options:
The InfoCrank M30 power meter is not compatible with a BB30/PF30 bike bearing set up that is already pre-installed. The Praxis M30 bottom bracket must be installed with the InfoCrank.
If you have a BB30 that does not have the circlips, or a PF30/OSBB that does not have a clean bore all the way through the frame, the Praxis M30 bottom bracket provided will not work.
The only frames the InfoCrank M30 with the 30 mm spindle is NOT compatible with are BB90 (Trek) or Cannondale BB30A.
We also sell the Verve InfoCrank 24 mm power meter which uses a Shimano 24 mm spindle and works on any Shimano 24 mm bottom bracket.
If you have any questions on compatibility, please contact us and we would be happy to help.
Name | Verve InfoCrank M30 Power Meter |
Bike Type | Road |
Location of Power Measurement | Crank Arm |
Left or Both Legs Measured | Both |
Independent Left/Right Measurement | Yes |
Installation | More involved (60 min. estimated) |
Communication Protocol | ANT+ |
Claimed Accuracy | +/- 0.5% |
Weight | 690 grams (crank arms, spider and spindle) |
Battery Type | SR44 |
Battery Life | 500 hours |
Method of Cadence Measurement | Accelerometer (CPS Technology) |
BCD | 130 |
Q Factor | 150 mm |
Warranty | 2 years |
We promise your satisfaction and offer an easy return policy
Reviews
There are no reviews yet.