Skip to main content

Pioneer Power Meter Single Leg Installation Kit

Josh Matthew May 15, 2018

$499.99

Add the Pioneer Power Meter onto your existing Shimano, Cannondale or Campagnolo crank

Only 1 left in stock

Description

About the Pioneer Power Meter Single Leg Installation Kit

The Pioneer Power Meter Single Leg Installation Kit allows you to add the Pioneer Power Meter onto your existing Shimano, Cannondale or Campagnolo crank. The kit comes with everything you need to package and send your existing crank arm to Pioneer where your new power meter will be professionally installed.

Featuring Pioneer’s 12-point force measurement technology, the Pioneer Power Meter is known for its accuracy and advanced data metrics. Pioneer power meters can measure your pedaling forces every 30 degrees, for 12 points of measurement per pedal revolution. When paired with a Pioneer Cycle Computer (optional), you get access to Pioneer’s HDPower Metrics. These metrics include Force Vector, Torque Vector and Pedaling Efficiency analysis.

Pioneer power meters run off an easy to change CR2032 battery and gets approximately 180 hours of battery life. The unit is lightweight, adding only 22 grams to the weight of the crank arm and it is both IPX6 and IPX7 water resistance certified. In addition, the power meter is ANT+ compatible. This means you can use it with the Pioneer Cycle Computer or your favorite ANT+ head unit.

 

How it Works

The kit comes with everything you need to package and send your existing crank arm to Pioneer where your new power meter will be professionally installed. The entire process only takes about 7-10 days.

  1. Order this Pioneer Power Meter Single Leg Installation Kit
  2. Pack your left crank arm in the box that arrives and ship it directly to Pioneer’s installation center where they will install their power meter on your crank arm
  3. When completed, your new power meter will be shipped directly back to you

 

Installation Kit Compatibility

Compatible crank arms include:

  • Shimano
    • DURA-ACE 9100
    • DURA-ACE 9000
    • Ultegra R8000
    • Ultegra 6800
    • 105 5800
    • XT M8000
    • XTR M9020
  • Cannondale
    • Hollowgram Si
    • Hollowgram SiSL2
  • Campagnolo
    • Potenza 11

Compatible crank arm lengths include all lengths from 165 mm to 180 mm.

 

Specs

NamePioneer Single Leg Kit
Bike TypeRoad and MTB
Location of Power MeasurementCrank Arm
Left or Both Legs MeasuredLeft only
Independent Left/Right MeasurementNA
InstallationEasy
Communication ProtocolANT+
Claimed Accuracy+/- 2.0%
Weight22 grams (added weight)
Battery TypeCR2032
Battery Life180 hours
Method of Cadence MeasurementAccelerometer or Magnet
Warranty2 years

Reviews

There are no reviews yet.

Be the first to review “Pioneer Power Meter Single Leg Installation Kit”

Shopping Cart